Close
SE145.0045 - EASA.21J.339 - SE.21G.0016 - LFS2007:47
Find us on Facebook

SWEDEN

A member of the European Union

PRODUCTION ORGANISATION APPROVAL CERTIFICATE

Reference: SE.21G.0016

Pursuant to Regulation (EC) No 216/2008 of the European Parliament and of the Council and to Commission Regulation (EU) 748/2012 for the time being in force and subject to the conditions specified below, the Swedish Transport Agency, Civil Aviation Department hereby certifies:

Bromma Air Maintenance AB
(Reg.No: 556148-8106)
Hangar 4, Bromma Airport, SE-168 67 Bromma
Sweden

as a production organisation in compliance with the Annex (Part 21), Section A, Subpart G of Regulation (EU) No 748/2012, approved to produce products, parts and appliances Iisted in the attached approval schedule and issue related certificates using the above references.

CONDITIONS

  1. This approval is limited to that specified in the enclosed terms of approval, and

  2. This approval requires compliance with the procedures specified in the approved production organisation exposition, and

  3. This approval is va lid whilst the approved production organisation remains in compliance with the Annex (Part 21) of Regulation (EU) No 748/2012.

  4. Subject to compliance with the foregoing conditions, this approval shall remain valid for an unlimited duration unless the approval has previously been surrendered, superseded, suspended or revoked.
Date of original issue: 1 July 2012
Date of this revision: 18 December 2015
Revision No: 3
Signed:  

Jukka Salo


For the Competent Authority: Swedish Transport Agency, Civil Aviation Department

 SWEDEN
A Member of the European
Union		  Terms of Approval TA: SE.21G.0016 
This document is part of Productian Organisation Approval Number SE.21G.0016 issued to:
Company name: Bromma Air Maintenance AB
Section 1. SCOPE OF WORK:
PRODUCTION OF  PRODUCTS/CATEGORIES
C1 Appliances Structural, MetaIIic/non-metallic, Mechanical/ Electrical/Electronic
C2 Parts Structural, MetaIIic/non-metallic, Mechanical/ Electrical/Electronic
For details and limitations refer to the Productian Organisation Exposition,
POE Chapter 1.8 Scope of work
Section 2. LOCATIONS:
(Principle place of business) 1. Hangar 4, Bromma Airport, SE-168 67 Bromma, Sweden,
Section 3. PRIVILEGES:
The Productian Organisation is entitled to exercise, within its Terms of Approval and in accordance
with the procedures of its Productian Organisation Exposition, the privileges set forth in 21A.163.
Subject to the following:
Prior to approval of the design of the product an EASA Form l may be issued on ly for conformity
purposes.
 
Date of original issue
1 July 2012:		 Signed:
Date of this revision
18 December 2015:		 Jukka Salo
Deputy Head of Maintenance Organisations
Revision No.:
3
 For SWEDISH TRANSPORT AGENCY